The heavy-duty Max-A-Form® forming system was used for the mat foundation, support columns and tie beams. The contractor reconfigured the Max-A-Form system for each of these structural elements to maximize equipment usage and minimize the total amount of equipment needed on the site.
To support the mid- and upper-level construction, a "work platform" of Max-A-Form panels, Symons Soldier construction beams, Versiform® walers and Symons aluminum beams was designed. This work platform kept the mat foundation free from any obstructions, supported the column and tie beam construction, and provided a stable base for shoring the vessel slab.
The main component of the work platform design was a Max-A-Form panel. The panels were used on edge as stringers, supported from the columns with Anchor Brackets. The Max-A-Form panels were used in this self-spanning application for all four bays in the structure, with only minimal support from Symons Soldier towers below. A walkway was added to the work platform and exterior columns to provide safe access around the entire building perimeter.
No comments:
Post a Comment